|
 |
|
File Archive [15 KB] |
|
|
Play Instructions:
- Install the game - Full Installation.
- Extract the File Archive to the game directory
- Execute RUNME.BAT to remove the CD-Check.
- Play the Game!
|
|
|
File Archive [3 KB] |
|
|
CD-Copy Instructions for CD#1:
- Create the following temporary directories:
- Copy the full contents of the original CD#1 to TempDir#1.
- Extract the EGCOUT.COM Patch to: C:\TEMP\CD\SETUP\EXE
- Remove the Write-Protection from: LOADLIB.DLL
- Burn the contents of TempDir#1 to a CD-R using the same CD-Label as the original CD.
- Remove TempDir#1.
CD-Copy Instructions for CD#2:
- Create the following temporary directories:
- Copy the full contents of the original CD#1 to TempDir#1 except for the LASERLOK directory.
- Burn the contents of TempDir#1 to a CD-R and use the same CD-Label as the original CD.
|
|
|
File Archive [709 KB] |
|
|
CD-Copy Instructions for CD#1
- Create the following temporary directory:
C\TEMP\CD
Copy the full contents of the original CD#1 to TempDir#1.
Replace the original <TempDir#1>\SETUP\EXE\LOADER.EXE file with the one from File Archive.
Burn the contents of TempDir#1 to a 74 minutes CD-R and use the same CD-Label as the original CD.
CD-Copy Instructions for CD#2
- Create the following temporary directories:
- TempDir#1 : C\TEMP\CD
- TempDir#2
: C\TEMP\AUDIO
Copy the full contents of the original CD#2 to TempDir#1.
Extract all Audio/CDDA tracks to TempDir#2.
Create a Mixed Mode CD and burn the contents of TempDir#1 & TempDir#2 to a 74 minutes CD-R and use the same CD-Label as the original CD.
Play the Game!
|
| NOTE: |
The original CD#2 is an 80 minutes CD. But if you follow the above instructions it also fits on a 74 minutes CD-R. |
|
|
| Language |
SPANISH |
| CD Volume Label |
CD#1: OUTCAST
CD#2: OUTCAST_CD2 |
| Data track |
CD#1: 604.8MB [309676 sectors]
CD#2: 71.5MB [36649 sectors] |
| Audio tracks |
CD#1: <None>
CD#2: 17 |
| Protection |
CD#1: <None>
CD#2: SecuROM |
| Main Executable |
CD#1: Outcast.exe [339968 bytes]
CD#2: Outcast.exe [348216 bytes] |
| CD-Reader |
Matshita CR-585 |
| CD-Writer |
Yamaha CDR200t |
| Software |
CDRWIN 3.6b |
| CD-R Media |
2x TRAXDATA TXW074 |
| Instructions |
- |
|
|
|
File Archive [777 KB] |
|
|
Play Instructions:
- Remove the Read-Only attribute from the following files:
- OUTCAST\OC\LOADER.EXE
- OUTCAST\OC\OC1.EXE
- OUTCAST\OC\OC2.EXE
- OUTCAST\OC\OC3.EXE
- Extract the following files to the <GameDir>\OUTCAST\OC directory:
- LOADER.EXE
- OC1CRK.EXE
- OC2CRK.EXE
- OC3CRK.EXE
- Extract the following file to the OUTCAST directory:
- Execute all Patches (OUTCASTCRK.EXE, OC1CRK.EXE, OC1CRK.EXE & OC1CRK.EXE) to remove the CD-Check.
- Play the Game!
|
| NOTE: |
To remove the Read-Only attribute from a file Right-Click the file, select Properties and deselect the Read-only attribute.
This patch also works fine for the FRENCH & SPANISH version.
|
|
|
|
File Archive [762 KB] |
|
|
CD-Copy Instructions for CD#1:
- Create the following temporary directories:
- Copy the full contents of the original CD#1 to TempDir#1.
- Replace the original LOADER.EXE file with the one from File Archive.
- Burn the contents of TempDir#1 to a CD-R and use the same CD-Label as the original CD.
|
CD-Copy Instructions for CD#2:
- Start CDRWIN (3.5 or higher).
- In the CDRWIN - CDROM Recording Tools
window click Backup Disc.
- In the Backup Disc window change the
following settings (all other settings should be left default):
|
| Main |
| Backup Mode... |
Select Copy
to Image and Record |
| Devices |
| CD Reader |
Select Source
CD-Reader |
| CD Recorder |
Select Destination
CD-Writer |
| Reading
Options |
| Copy RAW Sectors |
Select |
| Error Recovery... |
Select
Ignore |
| Jitter Correction... |
Select Auto |
| Subcode Analisys... |
Select Auto |
| Read Retry Count |
0 |
| Data Speed |
1x
(when possible select a faster speed) |
| Audio Speed |
1x
(when possible select a faster speed) |
| Recording
Options |
| Speed |
1x
(when possible select a faster speed) |
|
- When ready click START to create the
imagefile & burn the CD.
|
| NOTE: |
The CD-Image will be bigger than 80 minutes so use the appropriate CD-R80 media to the OverSize/OverBurn the image. |
|
|
| Language |
GERMAN |
| CD Volume Label |
CD#1: OUTCAST
CD#2: OUTCAST_CD2 |
| Data track |
CD#1: 596 Mb - 1 Mode1 Track (305298)
CD#2: 31 Mb - 1 Mode1 Track (015745) |
| Audio tracks |
CD#1: <None>
CD#2: 17 (015746-327040) |
| Protection |
CD#1: <None>
CD#2: LaserLock |
| Main Executable |
Outcast.exe [348.216 bytes] |
| CD-Reader |
UltraPlex |
| CD-Writer |
Teac CD-R55S |
| Software |
CDRWIN 3.7d |
| CD-R Media |
2x Ricoh CD-R74 |
| Instructions |
- |
|
|
|
File Archive [704 KB] |
|
|
Play Instructions:
- Install the game from CD#1 - Full Installation.
- Copy the *.PAK files from CD to the <GameDir>\OC directory.
- Extract the File Archive to the <GameDir>\OC directory.
- Execute CRACK-RAZ99.BAT to remove the CD-Check.
- Replace the original LOADER.EXE file with the one from File Archive.
- Play the Game!
|
|
|
File Archive [762 KB] |
|
|
CD-Copy Instructions for CD#1:
- Create the following temporary directories:
- Copy the full contents of the original CD#1 to TempDir#1.
- Replace the original <TempDir#1>\SETUP\EXE\LOADER.EXE file with the one from File Archive.
- Burn the contents of TempDir#1 to a CD-R and use the same CD-Label as the original CD.
|
CD-Copy Instructions for CD#2:
- Create the following temporary directories:
- TempDir#1 : C:\TEMP\CD
- TempDir#2 : C:\TEMP\AUDIO
- Copy the full contents of the original CD#2 to TempDir#1 except for the hidden LASERLOK directory.
- Extract all Audio/CDDA tracks to TempDir#2.
- Create a Mixed Mode CD and burn the contents of TempDir#1 & TempDir#2 to a CD-R and use the same CD-Label as the original CD.
- Play the Game!
|
| NOTE: |
The Audio tracks can be extracted using EasyCD Creator, WinDAC or AudioGrabber. For more read the NewBie Hints page.
These instructions also work fine for the FRENCH version.
|
|
|
|
File Archive [762 KB] |
|
|
CD-Copy Instructions for CD#1:
- Start Nero
- Burning Rom (4.0.0.5 or higher).
- From the action-bar choose File and select
CD-Copy.
- Use the following settings (all other settings should be
left default):
|
| Image
Tab |
| Image file |
Enter a Image
filename |
| Copy
options Tab |
| On the fly |
DeSelect |
| Drive with source CD... |
Select Source
CD-Reader |
| Read Speed |
Max Speed |
| Read
options Tab |
| Number of retries before read
error |
1 |
| Ignore Read Errors |
DeSelect (if
selected) |
|
- When ready click Copy CD to start the copy
process.
|
CD-Copy Instructions for CD#2:
- Create the following temporary directories:
- TempDir#1 : C:\TEMP\CD
- TempDir#2 : C:\TEMP\AUDIO
- Use BlindRead to copy the full contents of the original CD#2 to TempDir#1.
- Create this directory: <TempDir#1>\PATCH
- Extract the File Archive to the <TempDir#1>\PATCH directory.
- Extract all Audio/CDDA tracks to TempDir#2.
- Create a Mixed Mode CD and burn the contents of TempDir#1 & TempDir#2 to a CD-R and use the same CD-Label as the original CD.
- Play the game!
|
Play Instructions:
- Install the game - Full Installation.
- Replace the original LOADER.EXE file with the one from File Archive.
- Play the Game!
|
| NOTE: |
The Audio tracks can be extracted using EasyCD Creator, WinDAC or AudioGrabber. For more read the NewBie Hints page. |
|
|
|
|
